 |
||||||||
 |
||||||||
|
|
 |
 |
 |
 |
 |
Core Components: Binding Options Gunther has a myriad of options available to suit every possible application. In fact, no other system on the market can offer the range of automated, in-line binding options than Gunther can – stitching and stapling, corner or booklet style, as well as VeloBind™ and Slip & Grip™ can be selected as needed to enhance appearance and meet regulatory requirements
Book Stitchers are two stitchers placed side by side. They activate together to place two stitches on the document set approximately 2-1/2 inches from the top and bottom of the sheets. Stapler
Velo-Bind The Velo-Bind module places two mating plastic strips over the left edge of a document set. It can handle between 2 and 90 sheets of 20-pound bond (or the equivalent). The operator loads cassettes of male and female strips. Each cassette holds 50 pieces. Four cassettes can be loaded at a time. Slip & Grip
Gunther offers a Slip and Grip module as an in line option on
Convertible systems. Slip and Grip is a binding method that utilizes
an attractive plastic sleeve placed along the eleven inch edge of an
8-1/2 X 1 1 inch booklet. The sleeve has a triangular cross section
and pinches the paper in its "jaws" for a secure grip. Paper can be
removed by sliding the sleeve off by hand. This facilitates easy
updating of documents. |
||
 |
 |
 |
||||||
 |
 |
|||||||
|
|
||||||||
 |
||||||||
|
|
||||||||
 |
|
|
|
|
|
|
|
|
Corner Stitcher:
positioned to apply one stitch to the upper left corner of a
document in the portrait orientation. It places a stitch
approximately 3/8 inch from the top of the sheets. 2
to 40 sheets may be stitched. A Corner Stitcher can also be placed
so that it applies the stitch to the upper left of a document
printed in a landscape format.
Gunther
offers a book stapler unit which can staple 2 to 110 sheets of 20 lb
bond paper.
